The Nemo Grabo Pro-Lifter 20 Electric Vacuum Suction Cup Lifter uses the benefits of any industry that requires the lifting and moving of large or heavy objects. The tool works at a maximum vacuum capacity of 11.6 psi， with an optimum lifting capability for as heavy as 375 lbs. Pro-Lifter has a pumping capacity of 20 liters per minute， a best in class.
Nemo Grabo GP-1LI-FB-1S Pro-Lifter 20 Electric Vacuum Suction Cup Features:
- Weight is displayed in both pounds and kgs
- The foam rubber vacuum seal on the Grabo Pro tool is strong and resistant to loss of vacuum pressure
- Features a digital display， smart digital pressure sensor， and smart settings for both weight and pressure
- Rabo Pro is also equipped with four lifting lugs placed on both sides of the grab handle
The Nemo Grabo NG-1B-FB-1S Electric Vacuum Suction Cup Lifter can work with:
- Wood
- Drywall
- Granite
- Glass Tile
- Porcelain
Nemo Grabo NG-1B-FB-1S Electric Vacuum Suction Cup Lifter Specs:
| Equipment Type | Lifting Equipment |
| Charger Input Voltage | 100-240VAC 50/60Hz |
| Battery Charging Time | ~2hrs |
| Non-Stop Running Time (Full Charge) | 1.5hrs |
| Running Cycles (On Full Charge) | 900 ON-OFF cycles of 10 seconds |
| Stand-by Mode (Charge Hold) | 30 days |
| Pump Service Life | 100000+ ON-OFF cycles / 800+ hrs continuous |
| Rated Air Flow | 0.7cfm (20 L/min) |
| Working Temperature | 32°F~140°F ( 0°~60 °C ) |
| Applicable Surface Type | Peak/valley heights less than 0.1”， arc less than 5° |
Comment